Bondo | Sand Paper | Temperature Guard
Bondo | Go top

Bondo Home Solutions

BONDO HOME SOLUTIONS products are application engineered for a variety of household repairs. Easy, detailed instructions make them easy-to-use by contractors and beginners alike. Products include kits for the repair of drywall, concrete, stucco, fiberglass and rotted wood. BHS products are sold through home improvement stores and hardware retailers.

 
BHS Fiberglass Cloth Tape 4X96
  • Unit Weight: 0.474 LB
 
BHS Spreaders/Mixing Board White
  • Unit Weight: 0.364 LB
 
BHS Extra Strength All Purpose Epoxy 1/2 Pints
  • Unit Weight: 1.904 LB
 
BHS Extra Strength Epoxy Resin 1/2 Pints
  • Unit Weight: 1.744 LB
 
BHS Extra Strength Wood Repair Epoxy 1/2 Pints
  • Unit Weight: 3.38 LB
 
BHS Easy Patch 3 X 6
  • Unit Weight: 0.833 LB
 
BHS All Purpose Putty Quart
  • Unit Weight: 2.303 LB
 
BHS Drywall Repair Compound 1/2 Pint
  • Unit Weight: 0.724 LB
 
BHS Concrete Brick And Stucco Compound 1/2 Pint
  • Unit Weight: 0.794 LB
 
BHS Wall Repair Kit
  • Unit Weight: 2.863 LB
 
BHS Metal Repair Kit
  • Unit Weight: 1.044 LB
 
BHS Scratch Nail Hole Putty 1.5 Oz
  • Unit Weight: 1.168 LB
 
Sand Paper | Go top

Deco Sander

The Deco Sander telescopic sanding tool heralds a completely new era when sanding walls and ceilings. Sanding becomes faster, more effective and easier; and best of all, dust-free.
 
Antistatic Telescopic tube with sanding tool
  • The sanding tool is fastened to the telescopic tube with a joint that can be bent in all directions towards the surface
  • The tube can be extended up to 2,3 metres.
  • The sanding tool sucks towards the surface when sanding - no hard pressure is needed
  • The telescopic tube and the sanding tool are included in the Deco Sander package
 
Antistatic hose 25,4/32mm x 4m
  • With the flexible hose it is also easy to work on a large area
  • The hose is antistatic in order to eliminate sparks and flashorers
  • The hose is included in the Deco Sander package
  • Easy grip attachment and removal
 
Deco Sander Adapter
  • The adapter enables you to connect the Deco Sander to almost all industrial vacuum cleanersl
  • Diameter 30-47 mm – the adapter will be included in the Deco Sander package but can also be ordered separately
 
Abranet sanding strips
  • Abranet sanding strips make sanding with Deco Sander easy and dust-free
  • The dust is continuously being sucked away from the sanding strip through the thousands of extremely small holes into the tube and the vacuum cleaner
  • Abranet sanding strips in size 70x198mm, grit 120 are included in the Deco Sander package
 
Abranet sanding strips
  • Use the vacuum cleaner with hand-sanding machines, hand-sanding blocks, the Deco Sander and the Miro 955
  • The vacuum cleaner can be used with a paper as well as a plastic dustbag
 
Temperature Guard | Go top

TempShield™ Reflective Air Cellular Insulation for interior packaging

The Deco Sander telescopic sanding tool heralds a completely new era when sanding walls and ceilings. Sanding becomes faster, more effective and easier; and best of all, dust-free.
 
FoilBuild
  • Our top-of-the-line reflective insulation. Tough polyethylene bubble sandwiched between two layers of aluminum. Ideal for wide use as radiant barrier and is available in 4' X 125' 500 Sq. Ft. Rolls, 4' standard width. Other widths are available.
 
FoilBuild-1 SP
  • Tough polyethylene bonded to 1 layer of aluminum. Ideal for concrete slabs, and aesthetic applications where reflective foil is only needed on one side, Available in 500 Sq. Ft. Rolls, 4' standard width. Other widths are available.
 
Attic
  • Unroll the FoilBuild as you work, and cut it to suitable lengths. Allow for proper ventilation - see below. Staple FoilBuild to the undersides of exposed rafters or between the trusses. Better ventilation in the attic increases comfort and helps the materials of your home last longer. Be sure not to block ventilation paths when you install FoilBuild.
 
Crawl Space
  • Check the crawl space to determine distance between floor joists- 16" or 24" on-center. Locate water pipes and heating ducts which hang below the floor joists. They will need to be insulated. FoilBuild Pipe Wrap and Duct Insulation are designed specifically for this use. You do not need to wrap water pipes or duct work that fall between floor joists. FoilBuild installed below will provide adequate insulating without wrapping them. Install starting at one end of the house and face staple FoilBuild to the bottom of the floor joist. Leave enough length so the insulation can be pulled up to the band board and stapled. On the next run, face staple to the bottom of the floor joist. Overlap tabs and seal with our Foil Tape to create a vapor barrier. At the ends, staple up to the sub-floor or band board.
 
Walls- Post Frame
  • When main supports are installed, you may staple FoilBuild 48" Insulation horizontally to the support beams. Overlap and tape seams and tape with our Foil Tape. Be careful to close gaps in the seams as they will cause air infiltration, which may cause condensation.
 
Walls with masonry/Metal Building Roof
  • Install 1" x 2"  wood furring strips on the bottom of and perpendicular to the Z purlins on 24" centers. Use sheet metal screws to secure the furring strips to the Z purlins. Overlap and tape furring strips together and tape. Staple tape for reinforcement. Use 48" wide FoilBuild Insulation and staple to furring strips. You will not need to cut the FoilBuild Insulation to an exact size before installing, since the insulation is below the Z purlins. Overlap and tape seams and tape together using Foil Tape. Gaps will cause air infiltration which may cause condensation. Prior to installation of FoilBuild, inspect the roof area for clutter - water sprinkler systems, power lines and lights. Sprinkler systems are especially important. All water pipes must be below the insulation to prevent the possibility of freezing in the winter. In many instances, the FoilBuild must be installed up near the roof deck.
Created by Valley IT Solutions